After the multi-lane paste packing machine arrives at the factory, don’t know how to connect the conveyor and the feeding pump?

After the multi-lane paste packing machine arrives at the factory, don’t know how to connect the conveyor and the feeding pump?

finished product conveyor

When the multi-lane paste packing machine of APM’GT arrives at the factory, you will not install the supporting equipment? Don’t be afraid, I will teach you!

Finished Product Conveyor

The finished product conveyor is generally used to transport the finished bags that have been made by the machine to the back-end inspection or packaging production line. And its connection method is also simple. Put the conveyor under the machine first, and connect its cable to the reserved interface of the machine.

Liquid Feeding Pump

The liquid feeding pump has the characteristics of strong corrosion resistance, durability, and wear resistance. It is often used to transport some liquids with strong or poor fluidity to packaging equipment. It has no cumbersome operation and is easy to install and maintain. We only need to connect the water pipe on the feeding pump to the outlet of the bucket above the machine and connect the air pipe. First, insert the water pipe into the discharge port. Second, tighten the clamp on the water pipe to fix it. Third, connect the gas line to the feeding pump.

If you are worried that you can’t install the machine well, APM’GT also provides on-site installation training services and will arrange for professional after-sales personnel to provide on-site service. At the same time, we will also regularly update the debugging knowledge to facilitate your viewing and learning. As in the previous article How to replace the film of multi-lane stick pack packaging machine?, describes how to do it when the film is used up and replaced with a new film.

CONTACT US FOR ANY INQUESTIONS

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!