The GH240 packing machine is widely used in the product packaging of food, cosmetics, daily chemical products, and other enterprises. Liquid, granule, and powder small bag products are all packaged by corresponding machines. In the previous article “How to solve the situation that the bag packaging is not tight?“, we talked about how to solve the situation that the bag is not tightly sealed. So when the company purchases this type of machine and needs to adjust the length of the bag later, they will not. What should you do? Don’t worry, All-bloom packing machine has a professional after-sales team, which can provide online and offline guidance and training. If you are in a hurry, you can try the following steps first.
A. If the bag has no photocell:
Click on the screen on the machine, enter the Parameter Setting interface, and reset the length of the stretched film. You can set the length of your bag as long as it is.
B. If the bag has the photocell:
1. Click the screen on the machine to enter the Parameter Setting interface and reset the length of the film;
2. Enter the Operation Status interface and turn on the automatic color marking function;
3. Adjust the color sensor on the machine. The sensor has two modes, one is a green light and the other is a red light. Generally, we use red light mode for recognition. Move the photocell on the film to align with the sensor, and the light off means recognized. Then start the machine.
Watch the video below to see how it works:
However, the bag length is only adjusted, and the sealing and cutter positions of the machine have not changed. So when you start the machine, the bag will not be cut correctly. Therefore, after adjusting the machine parameters, you need to re-adjust the position of the cutter. So how do you adjust it? In the following article, I will explain how to change the cutter.